Mig Welding Machine

Product Details:

The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.

The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds

SALIENT FEATURES:

• Inverter based manual metal arc and metal inert gas - metal argon gas welding machines with single half-bridge ESD protected IGBT module.
• Single IGBT driver with isolation transformer, under voltage protection, dynamic short circuit protection, IEC60068-1 climate 40/085/56, non-corrosive climate class 3k3 acc En60721, VCEsat protection with failure management. Unique feature to prevent IGBT failure.
• Under voltage / over voltage / single phasing protection with indication.
• High temperature protection with indication.
• MCB on back panel for over current and short circuit safety.
• Superior welding quality with heavy filtration.
• High open circuit voltage for cellulose / low hydrogen electrode welding and for good arc striking.
• No load power consumption is very low (less than 0.1 KVA).
• Efficiency of power source is more than 92%.
• MMA / MIG selectivity with the help of switch with indication.
• Step-less current setting with display facility in MMA mode.
• Step-less voltage setting with display facility in MIG/MAG mode.
• Actual welding current and voltage is displayed on the front panel digital meters.
• Inductance adjustment is provided in MIG/MAG mode.
• 2T / 4T selectivity in MIG/MAG mode.
• Gas purge and wire inch facility on wire feeder unit.
• Inbuilt gas pre flow and gas post flow facility.
• Interconnecting cable of 5mtrs for MIG / MAG welding.
• Inbuilt hot start facility for good arc striking in MMA mode.
• Inbuilt arc force facility for less chances of sticking electrode with high penitretion in MMA mode.
• H-class insulated transformer winding.
• Compact and light weight design and good layout for easy servicing.
• High quality and sensitive negative feedback system for arc stability.
• High input supply voltage range.
• Rigid metallic frame structure and long life. 

Additional Information:

• Delivery Time: Ready stock.

Product Details:

The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.

The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds

Mig welding inverter model MIG/MMA-270 suitable for Mig welding and Arc welding application with 2 roller external wire feeder,Interconnecting cable of 3.5 mtrs, Extra gas pipe of 1.5 mtrs length, 24KD Mig torch with 3 mtrs cable, Earthing clamp with 2 mtrs cable, Conical nozzle 1 no.. 0.8mm Tip 2 no. 0.1mm Tip 2 no.Diffuser 1 no. CO2 pre heater with flometer and Allen key.

Additional Information:

• Delivery Time: Ready stock

Product Details:

CHARACTERISTICS AND USES: 

• Suitable For MMA/ Mig/ Tig.
• The System built welding expert database, automatic intelligent parameter combination
• Can Regulate the parameters stored user-defined
• Digital Control, waveform control to achieve a fine, a drop of perfect transition.
• Control System, all digital wire feeding Al wire. Stainless Steel wire, Wire Feeding Smooth.
• Special Stainless Steel welding of aluminum. The program design, solve the problem of welding arc difficult to fuses.
• Spatterless Welding.
• Rich peripheral interface, easy to realize automatic welding and welding robot.
• With common MIG. MIG. pulse double pulse MIG. manual welding carbon arc air gouging and other functions. 

Additional Information:

• Production Capacity: 10
• Delivery Time: within 2 to 3 weeks.
• Packaging Details: Cardboard packing.